Enphase, IQ 7 Micro Inverter, compatible with 60-cell PV modules (only), 208/240 volt, 250VA Peak Power, MC4 DC connectors, Female AC Connector, IQ7-60-2-US
The high-powered smart grid-ready Enphase IQ 7 Micro and Enphase IQ 7+ Micro achieve the highest system efficiency.
Part of the Enphase IQ System, the IQ 7 and IQ 7+ Micro integrate seamlessly with the Enphase Envoy-S, and the Enphase Enlighten monitoring and analysis software.
The IQ 7 and IQ 7+ Micro extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty.
Easy to Install - Lightweight and simple. Faster installation with improved, lighter two-wire cabling.
Productive and Reliable - Optimized for high powered 60-cell modules. More than a million hours of testing. Class II double-insulated enclosure.
Smart Grid Ready - Complies with advanced grid support, voltage and frequency ride-through requirements. Remotely updates to respond to changing grid requirements. Configurable for varying grid profiles.
8.34 x 6.89 x 1.19 Inches
MC4 (or Amphenol H4 UTX with Additional Q-DCC-5 Adapter)
Natural convection - No Fans
Approved for Wet Locations:
Class II Double-Insulated
Environmental Category / UV Exposure Rating:
Outdoor - IP67
Power Line Communication (PLC)
Enlighten Manager and MyEnlighten Monitoring Options. Compatible with Enphase IQ Envoy
AS 4777.2, RCM, IEC/EN 61000-6-3, IEC/EN 62019-1, IEC/EN 62109-2
Ambient Temperature Range:
-40°C to +65°C
Relative Humidity Range:
4% to 100% (Condensing)
Commonly Used Module Pairings:
235W to 350W+
60-Cell PV Modules
Maximum Input DC Voltage:
Peak Power Tracking Voltage:
Min / Max Start Voltage:
22 V / 48 Volts
Max DC Short Circuit Current (Module Isc):
Overvoltage Class DC Port:
DC Port Backfeed Under Single Fault:
PV Array Configuration:
AC Side Protection Requires Max 20A per Branch Circuit
Output Data (AC)
Peak Output Power:
Maximum Continuous Output Power:
Nominal Voltage / Range:
230V / 184-276V
Nominal Output Current:
Extended Frequency Range:
Maximum Units per 20 A (L-N) Branch Circuit:
16 (230 VAC)
Overvoltage Class AC Port:
AC Port Backfeed Current:
Power Factor Setting:
Power Factor (Adjustable):
0.7 Leading ... 0.7 Lagging
Choosing a selection results in a full page refresh.